Inertia reflected to the motor (J/i²) and inertia ratio
Inertia of a rotating load or a conveyor reflected to the motor shaft through the gearbox (J/i²) and the load-to-motor inertia ratio for servo and VFD drives. Through a gearbox the load inertia is divided by the square of the ratio: J' = J_L / i². The calculator is free and shows the formula, the working and a numerical example, with no sign-up.
Results
Indicative results: always verify with a qualified technician and the applicable standards. Legal notice
Step-by-step calculation with your values
Formulas
Rotating load
J' = \frac{J_L}{i^2} \cdot 10^4\lambda = \frac{J'}{J_m}Conveyor
J_L = m \cdot \left(\frac{D}{2000}\right)^2J' = \frac{J_L}{i^2} \cdot 10^4\lambda = \frac{J'}{J_m}How it is calculated
Through a gearbox the load inertia is divided by the square of the ratio: J' = J_L / i². For a conveyor, the mass m moving on a drum of diameter D equals J_L = m·(D/2)². The ratio λ = J' / J_m shows how easy the load is to control: with servo motors aim below 5–10; VFD drives tolerate higher values. 1 kg·m² = 10,000 kg·cm². Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.
Results are indicative: for real projects and installations always check applicable standards and a qualified professional.
Example (Rotating load)
With the values: Load inertia at the gearbox output = 2.5 kg·m²; Reduction ratio i = 20; Motor inertia (catalogue) = 35 kg·cm² — you get:
- Load inertia reflected to the motor J/i²: 62.50 kg·cm²
- Load-to-motor inertia ratio: 1.79
Frequently asked questions
Which formula does the “Inertia reflected to the motor (J/i²) and inertia ratio” calculator use?
Through a gearbox the load inertia is divided by the square of the ratio: J' = J_L / i². For a conveyor, the mass m moving on a drum of diameter D equals J_L = m·(D/2)². The ratio λ = J' / J_m shows how easy the load is to control: with servo motors aim below 5–10; VFD drives tolerate higher values. 1 kg·m² = 10,000 kg·cm². Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.
Is FunConvert free?
Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.