Pulley, sprocket and multi-stage total ratio
Pulley ratio (d2/d1) and sprocket ratio (z2/z1), output speed, and the total ratio of a gearmotor plus downstream drive or several stages in series. Pulleys: i = d2 / d1 (no slip). The calculator is free and shows the formula, the working and a numerical example, with no sign-up.
Results
Indicative results: always verify with a qualified technician and the applicable standards. Legal notice
Step-by-step calculation with your values
Formulas
Pulleys
i = \frac{d_2}{d_1}n_2 = \frac{n_1}{i}Sprockets
i = \frac{z_2}{z_1}n_2 = \frac{n_1}{i}Multi-stage
i_{tot} = i_1 \cdot i_2 \cdot i_3n_{out} = \frac{n_1}{i_{tot}}How it is calculated
Pulleys: i = d2 / d1 (no slip). Chain: i = z2 / z1. Drives in series multiply: i_tot = i1·i2·i3, and the final speed is n1 / i_tot. Example: a gearmotor with i = 20 plus a 15/45 chain (i = 3) gives i_tot = 60. Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.
Results are indicative: for real projects and installations always check applicable standards and a qualified professional.
Example (Pulleys)
With the values: Driving pulley diameter d1 = 100 mm; Driven pulley diameter d2 = 250 mm; Motor speed n1 = 1,400 rpm — you get:
- Reduction ratio i: 2.5
- Output speed n2: 560 rpm
Frequently asked questions
Which formula does the “Pulley, sprocket and multi-stage total ratio” calculator use?
Pulleys: i = d2 / d1 (no slip). Chain: i = z2 / z1. Drives in series multiply: i_tot = i1·i2·i3, and the final speed is n1 / i_tot. Example: a gearmotor with i = 20 plus a 15/45 chain (i = 3) gives i_tot = 60. Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.
Is FunConvert free?
Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.