Belt and chain speed from rpm and diameter, ratio for m/min
Belt speed (π·D·n) or chain speed (z·pitch·n) in m/min and mm/s, and the gearmotor ratio needed to reach a target m/min on the line. A belt advances one drum circumference per turn: v [m/min] = π·D [mm]·n2 / 1000. The calculator is free and shows the formula, the working and a numerical example, with no sign-up.
Results
Indicative results: always verify with a qualified technician and the applicable standards. Legal notice
Step-by-step calculation with your values
Formulas
Belt: speed
v = \frac{\pi \cdot D \cdot n_2}{1000}v_s = \frac{v \cdot 1000}{60}Chain: speed
v = \frac{z \cdot p \cdot n_2}{1000}v_s = \frac{v \cdot 1000}{60}d = \frac{p}{\sin(180^\circ / z)}Belt: ratio for m/min
n_2 = \frac{v \cdot 1000}{\pi \cdot D}i = \frac{n_1}{n_2}Chain: ratio for m/min
n_2 = \frac{v \cdot 1000}{z \cdot p}i = \frac{n_1}{n_2}How it is calculated
A belt advances one drum circumference per turn: v [m/min] = π·D [mm]·n2 / 1000. A chain advances z teeth × pitch per turn: v = z·p·n2 / 1000; the sprocket pitch diameter is d = p / sin(180°/z). For a target speed you need n2 = v·1000 / (π·D) and the ratio i = n1 / n2. For thick belts use D + belt thickness. Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.
Results are indicative: for real projects and installations always check applicable standards and a qualified professional.
Example (Belt: speed)
With the values: Output speed n2 = 70 rpm; Drum / pulley / roller diameter = 100 mm — you get:
- Belt / chain speed: 21.99 m/min
- Belt / chain speed: 366.5 mm/s
Frequently asked questions
Which formula does the “Belt and chain speed from rpm and diameter, ratio for m/min” calculator use?
A belt advances one drum circumference per turn: v [m/min] = π·D [mm]·n2 / 1000. A chain advances z teeth × pitch per turn: v = z·p·n2 / 1000; the sprocket pitch diameter is d = p / sin(180°/z). For a target speed you need n2 = v·1000 / (π·D) and the ratio i = n1 / n2. For thick belts use D + belt thickness. Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.
Is FunConvert free?
Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.