Current density (A/mm², A/m²)
Convert ampere per square millimetre (cables, windings) to ampere per square centimetre (A/mm² to A/cm²: 1 A/mm² = 100 A/cm²) and other current density (A/mm², A/m²) units. You can also convert ampere per square inch (A/in²) to ampere per square millimetre (cables, windings) (A/mm²), ampere per circular mil (A/cmil) to ampere per square millimetre (cables, windings) (A/mm²). Available units include A/m², kA/m², mA/cm², A/cmil, A/in², A/cm², abA/cm², A/mm², MA/m², A/mil². The converter is free, with the formula and a table of common values.
Indicative results: always verify with a qualified technician and the applicable standards. Legal notice
Shortcuts: S swap · C copy · / value · F favourite
The value in all units
What it measures
Current density J is current divided by cross-section: J = I/A. Cables and windings are discussed in A/mm² (often 2–6 A/mm² for copper depending on cooling and standard); 1 A/mm² = 100 A/cm² = 645.16 A/in². It is only a rule of thumb: cable sizing must follow the ampacity tables.
How it is calculated
Each unit is first converted to the SI reference unit (A/m²) and then to the target unit. Factors follow official SI/NIST definitions.
Quick conversion table: ampere per square millimetre (cables, windings) → ampere per square centimetre
| 1 A/mm² | 100 | A/cm² |
| 2 A/mm² | 200 | A/cm² |
| 5 A/mm² | 500 | A/cm² |
| 10 A/mm² | 1,000 | A/cm² |
| 20 A/mm² | 2,000 | A/cm² |
| 50 A/mm² | 5,000 | A/cm² |
| 100 A/mm² | 10,000 | A/cm² |
| 1,000 A/mm² | 100,000 | A/cm² |
| 1 A/cm² | 0.01 | A/mm² |
| 2 A/cm² | 0.02 | A/mm² |
| 5 A/cm² | 0.05 | A/mm² |
| 10 A/cm² | 0.1 | A/mm² |
| 20 A/cm² | 0.2 | A/mm² |
| 50 A/cm² | 0.5 | A/mm² |
| 100 A/cm² | 1 | A/mm² |
| 1,000 A/cm² | 10 | A/mm² |
1 ampere per square millimetre (cables, windings) =
| 1 A/mm² | 1,000,000 | A/m² (ampere per square metre) |
| 1 A/mm² | 1,000 | kA/m² (kiloampere per square metre) |
| 1 A/mm² | 100,000 | mA/cm² (milliampere per cm²) |
| 1 A/mm² | 0.0005067075 | A/cmil (ampere per circular mil) |
| 1 A/mm² | 645.16 | A/in² (ampere per square inch) |
| 1 A/mm² | 100 | A/cm² (ampere per square centimetre) |
| 1 A/mm² | 10 | abA/cm² (abampere per cm² (CGS-EMU)) |
| 1 A/mm² | 1 | MA/m² (megaampere per square metre) |
| 1 A/mm² | 0.00064516 | A/mil² (ampere per square mil) |
Frequently asked questions
Current density (A/mm², A/m²): what does it measure?
Current density J is current divided by cross-section: J = I/A. Cables and windings are discussed in A/mm² (often 2–6 A/mm² for copper depending on cooling and standard); 1 A/mm² = 100 A/cm² = 645.16 A/in². It is only a rule of thumb: cable sizing must follow the ampacity tables.
How do I convert ampere per square millimetre (cables, windings) to ampere per square centimetre?
1 A/mm² equals 100 A/cm² (convert ampere per square millimetre (cables, windings) to ampere per square centimetre). The converter first takes the value to the SI reference unit (A/m²) and then to the target unit, using official SI/NIST factors.
Which current density (A/mm², A/m²) units can I convert?
You can convert A/m², kA/m², mA/cm², A/cmil, A/in², A/cm², abA/cm², A/mm², MA/m², A/mil² and the other units listed in the table on this page.
Is FunConvert free?
Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.