Kinematic viscosity
Convert centistokes to square metres per second (cSt to m²/s: 1 cSt = 0.000001 m²/s) and other kinematic viscosity units. You can also convert stokes (St) to centistokes (cSt), centistokes (cSt) to square millimetres per second (mm²/s). Available units include mm²/s, cSt, cm²/s, St, m²/h, m²/s, in²/s, ft²/h, ft²/s. The converter is free, with the formula and a table of common values.
Indicative results: always verify with a qualified technician and the applicable standards. Legal notice
Shortcuts: S swap · C copy · / value · F favourite
The value in all units
What it measures
Kinematic viscosity ν is dynamic viscosity divided by density (ν = η/ρ). Oils are graded in cSt (1 cSt = 1 mm²/s); e.g. ISO VG 46 is 46 cSt at 40 °C.
How it is calculated
Each unit is first converted to the SI reference unit (m²/s) and then to the target unit. Factors follow official SI/NIST definitions.
Quick conversion table: centistokes → square metres per second
| 1 cSt | 0.000001 | m²/s |
| 2 cSt | 0.000002 | m²/s |
| 5 cSt | 0.000005 | m²/s |
| 10 cSt | 0.00001 | m²/s |
| 20 cSt | 0.00002 | m²/s |
| 50 cSt | 0.00005 | m²/s |
| 100 cSt | 0.0001 | m²/s |
| 1,000 cSt | 0.001 | m²/s |
| 1 m²/s | 1,000,000 | cSt |
| 2 m²/s | 2,000,000 | cSt |
| 5 m²/s | 5,000,000 | cSt |
| 10 m²/s | 10,000,000 | cSt |
| 20 m²/s | 20,000,000 | cSt |
| 50 m²/s | 50,000,000 | cSt |
| 100 m²/s | 100,000,000 | cSt |
| 1,000 m²/s | 1,000,000,000 | cSt |
1 centistokes =
| 1 cSt | 1 | mm²/s (square millimetres per second) |
| 1 cSt | 0.01 | cm²/s (square centimetres per second) |
| 1 cSt | 0.01 | St (stokes) |
| 1 cSt | 0.0036 | m²/h (square metres per hour) |
| 1 cSt | 0.000001 | m²/s (square metres per second) |
| 1 cSt | 0.001550003 | in²/s (square inches per second) |
| 1 cSt | 0.03875008 | ft²/h (square feet per hour) |
| 1 cSt | 0.0000107639 | ft²/s (square feet per second) |
Frequently asked questions
Kinematic viscosity: what does it measure?
Kinematic viscosity ν is dynamic viscosity divided by density (ν = η/ρ). Oils are graded in cSt (1 cSt = 1 mm²/s); e.g. ISO VG 46 is 46 cSt at 40 °C.
How do I convert centistokes to square metres per second?
1 cSt equals 0.000001 m²/s (convert centistokes to square metres per second). The converter first takes the value to the SI reference unit (m²/s) and then to the target unit, using official SI/NIST factors.
Which kinematic viscosity units can I convert?
You can convert mm²/s, cSt, cm²/s, St, m²/h, m²/s, in²/s, ft²/h, ft²/s and the other units listed in the table on this page.
Is FunConvert free?
Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.