🎒 SchoolNEW 💡 Suggest

Electrical conductivity (S/m, µS/cm, %IACS)

Convert microsiemens per centimetre (water) to millisiemens per metre (µS/cm to mS/m: 1 µS/cm = 0.1 mS/m) and other electrical conductivity (S/m, µS/cm, %IACS) units. You can also convert megasiemens per metre (MS/m) to % IACS (annealed copper = 100 %) (%IACS), siemens metre per mm² (m/Ω·mm²) (S·m/mm²) to megasiemens per metre (MS/m). Available units include µS/m, mS/m, µS/cm, mS/cm, S/m, ℧/m, S/cm, %IACS, MS/m, S·m/mm². The converter is free, with the formula and a table of common values.

1 µS/cm = 0.1 mS/m

Indicative results: always verify with a qualified technician and the applicable standards. Legal notice

Shortcuts: S swap · C copy · / value · F favourite

The value in all units

What it measures

Conductivity σ is the inverse of resistivity (σ = 1/ρ), measured in siemens per metre. Water uses µS/cm (tap water ≈ 200–800 µS/cm); metals use MS/m or %IACS: reference annealed copper is 58 MS/m = 100 %IACS (IEC 60028).

How it is calculated

Each unit is first converted to the SI reference unit (S/m) and then to the target unit. Factors follow official SI/NIST definitions.

Quick conversion table: microsiemens per centimetre (water) → millisiemens per metre

1 µS/cm0.1mS/m
2 µS/cm0.2mS/m
5 µS/cm0.5mS/m
10 µS/cm1mS/m
20 µS/cm2mS/m
50 µS/cm5mS/m
100 µS/cm10mS/m
1,000 µS/cm100mS/m
1 mS/m10µS/cm
2 mS/m20µS/cm
5 mS/m50µS/cm
10 mS/m100µS/cm
20 mS/m200µS/cm
50 mS/m500µS/cm
100 mS/m1,000µS/cm
1,000 mS/m10,000µS/cm

1 microsiemens per centimetre (water) =

1 µS/cm100µS/m (microsiemens per metre)
1 µS/cm0.1mS/m (millisiemens per metre)
1 µS/cm0.001mS/cm (millisiemens per centimetre)
1 µS/cm0.0001S/m (siemens per metre)
1 µS/cm0.0001℧/m (mho per metre)
1 µS/cm0.000001S/cm (siemens per centimetre)
1 µS/cm1.72414 × 10^-10%IACS (% IACS (annealed copper = 100 %))
1 µS/cm1 × 10^-10MS/m (megasiemens per metre)
1 µS/cm1 × 10^-10S·m/mm² (siemens metre per mm² (m/Ω·mm²))

Frequently asked questions

Electrical conductivity (S/m, µS/cm, %IACS): what does it measure?

Conductivity σ is the inverse of resistivity (σ = 1/ρ), measured in siemens per metre. Water uses µS/cm (tap water ≈ 200–800 µS/cm); metals use MS/m or %IACS: reference annealed copper is 58 MS/m = 100 %IACS (IEC 60028).

How do I convert microsiemens per centimetre (water) to millisiemens per metre?

1 µS/cm equals 0.1 mS/m (convert microsiemens per centimetre (water) to millisiemens per metre). The converter first takes the value to the SI reference unit (S/m) and then to the target unit, using official SI/NIST factors.

Which electrical conductivity (S/m, µS/cm, %IACS) units can I convert?

You can convert µS/m, mS/m, µS/cm, mS/cm, S/m, ℧/m, S/cm, %IACS, MS/m, S·m/mm² and the other units listed in the table on this page.

Is FunConvert free?

Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.

What do you think?

Your rating